Home > News & Events > Company News

Wrapping Machine Common Troubles And Elimination

Jan. 24, 2019

Here is Standard Pallet Wrapping Machine Factory talking about Wrapping Machine. 

If you have any idea about Pallet Packaging Machine, welcome to contact us and discuss.

Common troubles and elimination of winding machine:

一. The indicator light is not bright

1. Electricity on: Turn on the power

2. The indicator light is broken: substitute the indicator light.

3. The case Isn't plugged in: plugin plug

二. The turntable Doesn't turn

1. The power is not connected or missing phase: assess the power source 

2. The engine Isn't good: replace the engine

3. The chain breaks or falls off: reinstall the chain

4. The control button Isn't good: replace

5. Adjust the inverter adjustment knob to the minimum position: adjust to the Proper frequency

6. Emergency stop change in stop position: Open emergency stop switch

三. The lifting body does not lift or lower

1. The limit switch is broken or the turntable counts to make a change: bad

2. The power Isn't connected or missing stage: check the power source

3. A motor is broken: substitute the engine

4. The chain is stuck or broken: replacement

5. Lifting body or PLG is poor: replacement

6. Adjust the inverter adjustment knob to the minimum position: adjust to the Proper frequency

7. Emergency stop change in stop position: open emergency stop switch

四. Stretch Film

1. The wrap film has a busted or inferior quality: replacement

2. The pre-stretching motor Isn't great: replace the engine

3. Microswitch failure or tension spring exhaustion: replacement

4. The pre-stretched series is detached or the sprocket is loose: re-install the chain or fix the sprocket

5. The pre-pull motor rate does not match the turntable motor speed: adjust the speed between the 2 motors to match


Standard Pallet Wrapping Machine Factory


hot products