Pallet packing machine is suitable for the packaging of goods using pallets (such as container transportation of bulk goods and packaging of bulk pallets, etc.). It is widely used in glass products, hardware tools, electronic appliances, papermaking, ceramics, chemicals, food, beverages, building materials and other industries. It can improve logistics efficiency and reduce losses during shipping. It has the advantages of dust-proof, moisture-proof, and reduced packaging cost. So how to use it correctly? Wrapping Machine suppliers will come and tell everyone.
Unboxing, installation and commissioning
1. After the machine arrives at the site, check whether the machines, parts and accessories listed in the packing list are complete and whether the machine is damaged during transportation.
2. Check the certificate to confirm that the machine you will use is a qualified product and meets the requirements on your order.
3. Open the packing box at the designated position (be careful not to damage the machine), check the equipment and the accessories according to the packing list.
4. Read this manual carefully for installation, commissioning and use.
5. Pallet Packaging Machine should be installed in a drier indoor environment with no dust, no flammable and explosive chemicals and other substances that have a corrosive effect on the machine.
6. Place the turntable part on a flat floor, and connect the membrane system guide column to the turntable part. Install the slope (accessory, separately purchased) at the same horizontal level of the turntable. It should be convenient for the goods to be placed on or removed from the work position. Pay attention to the position and the gap between the turntable and the expansion screw (provided) to fix it after installation.
7. Check the other connected parts, whether the electrical wiring is loose or falling off, and fix all loose or falling parts and wires in time.
8. Be sure to provide a correct, stable and reliable fixed power supply (temporary wires are strictly prohibited).
9. Connect the motor wiring and sensor leads according to the corresponding wire numbers. Connect the power supply to the machine's power outlet. Make sure that it is correct and perform the ground test before testing. The connection should pay attention to the forward and reverse directions of the motor to confirm the operation. The direction should be in the manual state.
10. Check whether all the limit switches, limit switch arms, and limit stops are damaged and can be used normally in the correct position.
11. The chain and reducer have been lubricated or oiled before leaving the factory. Please confirm before operation.
12. Turn on the power and turn on the air switch in the electrical cabinet. After the machine is powered on and self-tested, it is in a standby state and can be debugged.
Pallet Packaging Machine
1. Before operating the inverter, please read the instruction manual of the inverter.
2. When the machine is in normal use, regularly check whether the various connecting parts of the machine are loose or falling off, and if so, be sure to tighten.
3. It is strictly prohibited to move or remove the upper and lower fixed limit blocks!
4. The turntable of the machine should run clockwise.
5. It is strictly forbidden to stand under the film system or stack any objects!
6. It is strictly forbidden to reach in or other objects when the roller of the film system rotates to prevent damage to the rubber roller or finger!
7. It is strictly forbidden to put your hand into the vicinity of the chain for maintenance or inspection during operation, or to perform other operations to prevent injury to your hand.
8. When the machine is running, the operator should stand in a safe place at a certain distance from the turntable. When the machine is finished and stopped, approach the machine to prevent people from being injured by cargo. Customized).
9. It should be firmly grounded or connected to zero (zero ground must not be mixed) to prevent leakage of electricity to damage the machine or personnel. 10. When the machine is moved to its original position, it should be re-installed and tested by professionals, and its safety performance before use.
11. Regularly check electrical and electrical connections and clean electrical cabinets.
The above is the correct usage method of the pallet packing machine shared by the Robot Pallet Wrapping Machine manufacturer. Hope to help everyone.
Copyright © Smart Wasp Intelligent Technology (Suzhou) Co,. Ltd.Sitemap