Automatic Pallet Wrapping Machine must be started after the goods have been placed firmly on the pallet to make sure there are no problems. The winding machine turntable should run clockwise. Do not let the winding machine unscrew the machine for maintenance or other operations during operation. It is forbidden to test the DC motor control board of the winding machine and the voltage between the brLC input point and the ground. The power supply voltage must not exceed the voltage required by the machine itself to avoid burning the machine. When the machine is in operation, the person should be at a certain safe distance from the turntable. After the machine stops running, close to the machine, move the goods down, turn off the switch, and cut off the power. In order to prevent the infusers from intruding and dumping the machine, a safety fence should be installed if necessary. When the machine is in normal use, check whether the connection parts of the machine are moved or detached regularly. If necessary, tighten them. Do not move or remove the upper and lower fixed limit blocks.
SMART WASP provide low price and high quality high speed pallet wrapper, welcome to contact us to know more.
Copyright © Smart Wasp Intelligent Technology (Suzhou) Co,. Ltd.Sitemap