Secret Of Pallet Packing Machine Chassis

The performance of a Wrapping Machine depends on the film frame, and the durability depends on the chassis. Because the wear parts of the entire machine are on the chassis, the choice of the chassis is not good, and problems often occur during subsequent use. Today Pallet Packaging Machine supplier will take the tray packaging machine as an example to reveal the chassis of the tray packaging machine for everyone.

Pallet Packaging Machine

The chassis of the tray packaging machine is mainly composed of components such as a turntable, a sprocket, and a supporting wheel, which are discussed in turn.

1. Turntable

The turntable of the pallet packing machine is used to carry goods, so it must reach a certain thickness, otherwise it will be deformed. The pallet is slightly deformed and will wear out the idler. The idler is like a car tire, and it must be replaced to a certain extent. The thickness of the turntable is generally divided into 10mm and 8mm. It is recommended that you choose a thickness of 10mm.

2. Sprocket

The turntable of the tray packaging machine is supported by sprocket wheels and supporting wheels. The larger the sprocket, the greater the support for the turntable, the more the pressure on the supporting wheel is shared, the smaller the pressure on the supporting wheel, and the more the abrasion of the supporting wheel becomes. Light; on the contrary, the smaller the sprocket, the greater the wear of the idler. At the same time, the motor drives the large sprocket vigorously, and it drives the small sprocket. The small sprocket will increase the load on the driving motor and easily cause damage to the motor. Therefore, you must choose the chassis of the large sprocket. At present, some manufacturers on the market use 298mm 60-tooth small sprocket wheels, while some companies that pay more attention to equipment quality use 412mm-diameter 80-tooth sprocket wheels, which are also the large sprocket wheels currently used in the tray packaging machine industry.

3. Supporting wheels

The pallet wheel of a pallet packing machine is a fragile consumable part like a car tire. Not only the quality of the pallet and sprocket will affect the loss rate of the pallet wheel, but the quality of the pallet itself is also very important. Brand manufacturers' pallet packing machines use nylon rollers, and some small manufacturers use plastic materials or inferior nylon materials to reduce costs. The quality of the idler is not as intuitive as that of the tray and sprocket. It can be directly referenced by its dimensions, which makes it difficult for users to judge. However, according to experience, if the thickness of the turntable is less than 10mm and the small sprocket is used, the quality of the idler is generally very Difficult to guarantee.

The quality of the tray packaging machine determines its service life and use cost. For example, blindly pursuing low prices and neglecting quality identification. In the process of use, either the motor is damaged or the idler is frequently replaced, which affects production and greatly increases manpower and financial resources. Consumption of energy is not worth the loss.

The above is the pallet packaging machine chassis knowledge introduced by Robot Pallet Wrapping Machine manufacturer. Hope to help everyone.