Smart Wasp Intelligent Technology (Suzhou) Co., Ltd.

Home ProductsExhibition & NewsContact Us
Home > Exhibition & News > Company News

Will You Change the Packaging Film for the Automatic Packaging Machine?

Aug. 26, 2022

Automatic packaging machine due to its simple structure, easy to operate, so its use is very wide, packaging finished products with high efficiency and low cost, by the screw hardware accessories, furniture accessories, fasteners, plastic toys, rubber and plastic industries.


Packaging machine in the production process of the enterprise, the user needs to be familiar with and master the packaging machine to replace the packaging film precautions.


●Please turn off the power to ensure that the machine is in a state of power failure, the operation is safer.


●Place the heat shrink film on the rollers above the heat shrink film packaging machine, noting that the open part of the film faces the inside of the heat shrink film packaging machine and is placed in the center.


●Pull the lever handle of the punching device down 90 degrees. After pulling the heat shrink film down and through the roller, pull the heat shrink film out about one centimeter, and then pass it through the triangle spreader from the belt conveyor section to thread the film.


●Pull the heat shrink film toward the front of the triangle spreader. Pass the film through the upper triangle spreader first, and then pass the film through the lower triangle spreader.


After the upper and lower heat-shrinkable films are threaded together, pull out a little, and then pull the open part of the heat-shrinkable film to the inlet of the waste pulling chain (belt).


●After the film material has passed through each roller and upper and lower triangle plate smoothly, return the punching control lever to the original position. (Otherwise, the machine will not work, i.e. the film cannot be fed out.)


X1300 Ring Type High Speed Fully Automatic Pallet Wrapping Machine

X1300 Ring Type High Speed Fully Automatic Pallet Wrapping Machine


1. The pallet wrapping machine uses LLDPE stretch film as the main packaging material to wrap the bulk goods stacked on the pallet.


2. The film provides additional support during transportation and storage to protect them from dust, moisture or damage.


3. The pallet winder has been widely used in industries such as glassware, tools, electronics and appliances, paper, pottery, food and beverage.


X1300 adds more automatic safety protection to enhance the safety performance. After pressing the emergency stop button, the rotation distance is reduced by 75% and the lifting distance is reduced by 90%. Pallets can be transported to the wrapping position only when the pallet height is less than the maximum wrapping height, otherwise not. When the operator changes the film, the whole equipment is in automatic protection and cannot be started.

hot products

Smart Wasp Intelligent Technology (Suzhou) Co,. Ltd.

Copyright © Smart Wasp Intelligent Technology (Suzhou) Co,. Ltd.